Use of different Intel processors possible: This motherboard is a strong foundation for a DIY NAS

Network storage is now available at relatively low prices. Even entry-level systems offer a wide range of functions, with systems from manufacturers such as QNAP or Synology offering a major advantage for end users: customers do not have to worry so much about configuration and security updates are usually delivered promptly.

A new motherboard from Topton is aimed at users who want to create a network storage system according to their preferences, allowing for maximum flexibility. The new mainboard is offered for direct import by various retailers, although the prices and availability vary. The mainboard complies with the Mini-ITX standard and measures 17 x 17 centimeters. An ATX power supply is required, but a compact model can also be used in view of the low power consumption.

Either an Intel N95 or an Intel Core i3-N305 is used as the SoC, with a copper heat sink already installed; a CPU and a case fan can also be ordered and installed. Up to 32 GB of DDR5 RAM with a clock frequency of up to 5600 MHz can be installed; ECC memory is not supported. There are a total of six SATA III ports available for mass storage devices. The installation of up to two M. 2280 SSDs is possible, whereby the installation of a second M.2 SSD excludes the use of the PCIe slot. Network connections take place via four RJ45 ports, each of which is said to offer a data transfer rate of 2.5 GBit/s.

Two USB 2.0 and one USB 3.0 ports are on board, plus a USB-C port, which also only supports data transfer via USB 2.0. Direct image output is possible via HDMI and DisplayPort, and a jack socket is available. Windows 10, 11 and Linux should be supported, which is no surprise given the processor architecture.

Source(s)

AliExpress

Editor of the original article: Silvio Werner - Senior Tech Writer - 8920 articles published on Notebookcheck since 2017
I have been active as a journalist for over 10 years, most of it in the field of technology. I worked for Tom’s Hardware and ComputerBase, among others, and have been working for Notebookcheck since 2017. My current focus is particularly on mini PCs and single-board computers such as the Raspberry Pi – so in other words, compact systems with a lot of potential. In addition, I have a soft spot for all kinds of wearables, especially smartwatches. My main profession is as a laboratory engineer, which is why neither scientific contexts nor the interpretation of complex measurements are foreign to me.
contact me via: silvio39191, LinkedIn

Translator: Jacob Fisher - Translator - 549 articles published on Notebookcheck since 2022
Growing up in regional Australia, I first became acquainted with computers in my early teens after a broken leg from a football (soccer) match temporarily condemned me to a predominately indoor lifestyle. Soon afterwards I was building my own systems. Now I live in Germany, having moved here in 2014, where I study philosophy and anthropology. I am particularly fascinated by how computer technology has fundamentally and dramatically reshaped human culture, and how it continues to do so.
Please share our article, every link counts!